Appendix E
Repacking the Cisco Nexus 7000 Series Switch for Shipment
For the upper cable management assembly on the left, loosen and remove five M4x10 screws, and
c.
then lift off the assembly as shown in
d.
Repeat Step 3c for the upper cable management assembly on the right side.
Figure E-29
1
Rack-mount bracket.
2
Upper cable management assembly.
For the lower cable management assembly on the left, loosen and remove four M4x10 screws, and
e.
then lift off the assembly as shown in
OL-23069-07
Figure
Removing an Upper-Cable-Management Assembly
Figure
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Repacking the System Components
E-29.
3
Loosen and remove five M4x10 screws.
4
Lift the upper cable management assembly off
the rack-mount bracket hooks.
E-30.
E-45