Repacking the System Components
Figure E-30
1
Lower cable management assembly.
2
Left rack-mount bracket.
Repeat Step 3e for the lower cable management assembly on the right side.
f.
g.
Open the box for the cable management frames and remove the packing materials.
h.
Place the packing cushion and cardboard dividers in the box as shown with Callouts 2 and 3 in
Figure
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
E-46
Removing a Lower Cable Management Assembly
E-31.
Appendix E
Repacking the Cisco Nexus 7000 Series Switch for Shipment
3
Loosen and remove four M4x10 screws.
4
Lift the lower cable management assembly off
the rack-mount bracket hooks.
OL-23069-07