Appendix E
Repacking the Cisco Nexus 7000 Series Switch for Shipment
Figure E-31
1
Open the cable management box.
2
Insert a packing cushion at the bottom of the
box.
3
Insert the cable management frame dividers.
4
Insert each of four cable management frames
in an open divider slot.
OL-23069-07
Packing the Cisco Nexus 7018 Cable Management System
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Repacking the System Components
5
Place the flat cardboard divider on top of the
cable management frames.
6
Place the top-cover box.
7
Insert a packing cushion above the top-cover
box.
E-47