Chapter 10
Installing or Replacing Components
Figure 10-26
1
Right side frame.
2
Left side frame.
Realign the EMI panel to the air intake area on the chassis, screw its four captive screws to the chassis,
Step 7
and tighten the captive screws to 8 in-lb (0.9 N·m).
OL-23069-07
Replacing the Front Doors and Frame Assembly on the Cisco Nexus 7010 Chassis
Attaching the Side Frame Assemblies to the EMI Panel
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
3
Use two 6-32 x 1/2-inch flat-head screws to
attach the right side frame to the right side of the
EMI panel. Tighten the screws to 8 in-lb (0.9
N·m).
4
Use two 6-32 x 1/2-inch flat-head screws to
attach the left side frame to the left side of the
EMI panel. Tighten the screws to 8 in-lb (0.9
N·m).
10-71