Serv. Tab (Service); Strg. Tab (Control) - Honeywell EK205-M Operating Instructions Manual

Operation

9.4.5 Serv. tab (service)

This tab is used to display, check, and parameterize special device settings or statuses. The
application is only intended for service technician (specialist staff) or a calibration officer when
commissioning or maintaining.
Display
Volume
Volume conversion
Measured values
Archives
Status
Date and time
Batteries
Inputs
Outputs
Interfaces
Device settings
Identification
Edit and delete
Examination
Data book

9.4.6 Strg. tab (control)

This tab is used to check special device settings. The application is only intended for service
technician (specialist staff) or a calibration officer when commissioning or maintaining.
Display Value
19
Administrator lock: Status / close
St.AL
19
Cod.A Enter / change administrator key
St.PL Calibration lock: Status / close
Menu Selection of the display menu
Main Content of the Main tab
19 Operate the device with high communication reliability (high level security, see application manual) so that this menu item is not
displayed.
Meaning
Submenu for volumes and associated parameters
Submenu for conversion and associated parameters
Submenu for analogue measurement values and associated
parameters
Submenu for archives located in the device
Submenu for current status, status tab and logbooks
Submenu for date and time and associated parameters
Submenu for device batteries and associated parameters
Submenu for the inputs and associated parameters
Submenu for all outputs and associated parameters
Submenu for the interfaces in the device
Submenu for general device settings
Submenu for the identification of the gas system
Submenu for triggering various deletion functions
Submenu for freezing function and test archive
Submenu with information from the data book of the device
Unit Access
- -
- -
- -
- C
- A
95
Address
3:170
3:171
1:170
1:1A1
2:1A1