Calling Up The Data, Navigation In The Display - Honeywell EK205-M Operating Instructions Manual

86

9.3.3 Calling up the data, navigation in the display

With the , , ,  arrow keys, you can move the cursor
values.
By pressing the key combination ESC  +  several times, you reach one of the Main, Cust.,
Admin, Serv. or Ctrl. tabs ( 9.3.1, Fig. 37). The active tab that the cursor is on is displayed with
a bright background (Fig. 38/1). At the tab level, you can use the arrow keys  or  to move the
cursor to the other tabs to display their content.
The Customer tab contains more data than can be displayed simultaneously. With the  arrow
key, you move the cursor from the tab to the data field (the bottom part of the display). If the
cursor is at the lowest visible value, the display is moved by pressing the  key again, which
makes the data visible. Accordingly, the cursor can be moved up with the  key and the display
will be moved up at the top visible value.
If the cursor hits a value that was saved with an associated time stamp, it is displayed
automatically. (Fig. 38/2)
1 Active tab
2 Value with associated time stamp
Fig. 38: Admin tab
in the display and switch to other
1
Operation
2