Table of Contents
Advertisement
52
−
In the dialog box
and then press "OK".
i
In enSuite from version 2.7 onwards, the name and issue (in brackets) of the
parameter file are both displayed. The file extension ".wpp" is not displayed.
i
If needed, any arbitrary wpp file can be selected with the
Make sure that this manually selected wpp file is suitable for the EK205-M software
version.
−
Click on "Start" in the bottom right and wait until the file has been successfully sent.
In the center of the window, you will see the number of rows that have been sent
i
along with the number of rows containing errors (if applicable)
You must check in such cases whether the necessary locks are open and/or
whether the file used is suitable for the device version. Contact the Honeywell
hotline (
−
To begin another task, click again on "Navigation" on the left-hand side.
"Select WPP file"
select the corresponding directory and the parameter file
EK205-M manual) is necessary.
Working with enSuite
"File
system..." button.
Advertisement
Table of Contents
