Staff - Honeywell EK205-M Operating Instructions Manual

20
3.4

Staff

WARNING!
Risk of injury in the event of insufficient qualification!
Improper use may result in considerable personal injury and material damage.
Therefore:
– Have all activities carried out by qualified staff only.
The following qualifications for different areas of activity are listed below in the instructions:
◼
Instructed staff
was instructed by the plant operator in an informational session on the tasks assigned to
him or her, and on possible hazards in case of improper behaviour.
◼
Specialist staff
has the ability, because of his or her technical training, knowledge, and experience, as
well as his or her knowledge of the relevant regulations, to carry out the work to the device
assigned to him or her, and to recognize and avoid possible hazards on his or her own.
◼
Gas specialist
has the ability, because of his or her technical training, knowledge, and experience, as
well as his or her knowledge of the relevant standards and regulations, to carry out work to
gas systems, and to recognize possible hazards on his or her own. A gas specialist
receives training for the specific location in which he or she works and is acquainted with
the relevant standards and regulations.
◼
Calibration officer
has the ability, because of his or her technical training, knowledge, and experience, as
well as his or her knowledge of the relevant standards and regulations, to carry out
calibration-protected work to gas systems. The calibration officer is trained to work with
calibration-protected devices and systems and is acquainted with the relevant standards
and regulations that apply.
◼
Electrical expert
has the ability, because of his or her technical training, knowledge, and experience, as
well as his or her knowledge of the relevant standards and regulations, to carry out work to
electrical systems, and to recognize and avoid possible hazards on his or her own. A
qualified electrician receives training for the specific location in which he/she works and is
acquainted with the relevant standards and regulations.
WARNING!
Risk for unauthorized persons!
Unauthorized persons who do not fulfil the requirements described do not know the
hazards in the work area.
Therefore:
– Keep unauthorized persons away.
– In the event of doubt, speak to people and direct them out of the working area.
– Interrupt the work as long as unauthorized persons are in the working area.
Safety