Ptz Settings On The Live View Tab; Figure 4-5 Ptz Controls; Table 4-2 Icons In The Ptz Control - Honeywell HNVE1 Reference Manual

PTZ Settings on the Live View Tab

Document 800-04195 Rev B
11/09
Figure 4-5 PTZ Controls
For panning and tilting the PTZ dome, click the arrows in the PTZ control. The icons in the
PTZ control are used for controlling (zoom, focus, and iris) the PTZ camera lens. The
following table lists the functions of the PTZ control icons.
Table 4-2 Icons in the PTZ Control
Icon
Zoom In
Zoom Out
Iris Close
Auto Iris
Iris Open
Focus Far
Auto Focus
Focus Near
When a PTZ dome is installed (for example, a Honeywell ACUIX™) you can:
• Move and control the PTZ dome while viewing video
• Run presets and tours configured in the PTZ Dome Setup view
• Run customized presets, preset tours, and mimic tours
HNVE1 V2.1 1-Channel Encoder Reference Guide
Click to...
Enlarge the area of interest.
Reduce the area of interest.
Close the camera iris to darken the video display.
Enable the camera auto iris mode. In auto iris mode,
the camera iris automatically adjusts according to
the light conditions.
Open the camera iris to brighten the video display.
Clearly view objects that are at a distance.
Enable the camera auto focus mode. In auto focus
mode, the camera lens adjusts automatically after a
pan, tilt, or zoom command.
Clearly view nearby objects.
49