Table of Contents
Advertisement
Working with enSuite
−
Press symbol
−
In the
"Search device and
−
Select
"Access"
default
settings".
−
In the field "Key" enter the administrator key.
−
Enter the EK205-M's IP address under "Address" and port number under "Port".
−
Press "OK".
−
After a few seconds "connected" is displayed at the bottom of the "Output" window.
7.4
Setting up a direct communication link to EK205-M
Prerequisite: A communication link between enSuite and the EK205-M ( section 8).
−
Ensure your PC or laptop has a COM port.
−
Start the enSuite program (i.e.
−
Select the
−
In the
"Search device and
−
Select
"Access"
"use default
−
Enter the serial communication link speed under
−
Press "OK".
−
After a few seconds "connected" is displayed at the bottom of the "Output" window.
7.5
Updating customized parameters
Prerequisite: A communication link between enSuite and the EK205-M via optical interface,
modem or network (TCP/IP) has been set up ( sections
−
Select "Navigation" on the left-hand side.
−
Click on the plus sign beside
of your devices.
−
Click on the entry beginning with the serial number of the connected device.
−
The device identifier is now displayed at the bottom of the navigation window. If no command
list is displayed underneath, click on the arrow next to the device identifier.
−
In the lower part of the navigation window, press
−
Click on the plus sign next to "Parameter" at the top of the navigation window, to expand the
parameter tree.
−
In this parameter tree you can open parameter pages, to update parameters or drill down to
open more parameter pages.
7.6
Send parameter file
Prerequisite: A communication link between enSuite and the EK205-M via optical interface,
modem or network (TCP/IP) has been set up ( sections
−
Select "Navigation" on the left-hand side.
−
Click on the plus sign next to "Connections" in the newly-opened navigation window.
−
Click on the entry beginning with the serial number of the connected device.
−
The device identifier is now displayed at the bottom of the navigation window. If no command
list is displayed underneath, click on the arrow next to the device identifier.
−
Select
"Send parameter
−
Click "Open..." in the top right.
"Search
device..." (magnifying glass symbol).
connect" window select the "LIS200" tab.
"LIS200", "User"
Start > Programs > Elster >
"Search
device..." icon (magnifying glass icon).
connect" window select the "LIS200" tab
"LIS200", "User"
settings".
"My
file".
"Administrator", "Connection" "TCP/IP" and
"Administrator", "Connection"
"Baud
rate".
Devices" in the newly-opened navigation window, to see a list
"Parameterize
enSuite).
"Serial
RS232" and
7.1
to 7.3).
online"
7.1
to 7.3).
51
"use
Advertisement
Table of Contents
