Table of Contents
Advertisement
84
9.3
Basics
As already explained in the section Construction and function, you can operate and program the
EK205-M using the operating elements on the front plate of the device:
2
3
6
Fig. 36: Front plate of the EK205-M
On plate in the housing floor, the calibration lock can be found in the form of a key
that can be sealed with an adhesive label. This needs to be operated to change
calibration-protected values and parameters. In the event of a calibration-protected
device, this may be carried out by a calibration officer only.
9.3.1 Display
The display is divided ex works into the five tabs of Main, Cust., Admin, Serv., and Ctrl., in which
the measurement values, settings and other data are displayed.
2
1
1 Data field
2 Cursor
3 Device status
The display in the data field in Fig. 37 (starting here with Vb) is different in the tabs. All other
display parts (in the top part) are the same regardless of the tab displayed.
1
4
5
8
7
3
4
Fig. 37 Structure of the display
1 Alphanumerical display
2 Arrow key ◄
3 Arrow key ▲
4 Arrow key ▼
5 Arrow key ►
6 HOME/CLR key combination
7 ENTER key combination
8 ESC key combination
5
4 Active tab
5 Inactive tab
6 Battery charging status
Operation
6
Advertisement
Table of Contents
