Working With Ensuite; Setting Up The Communication Link To The Ek205-M Via Optical Interface; Setting Up The Communication Link To Ek205-M Via A Modem; Setting Up The Communication Link To Ek205-M Via A Network (Tcp/Ip) - Honeywell EK205-M Operating Instructions Manual

50

Working with enSuite

7
enSuite is the parameter configuration and analysis program for current Honeywell products in
the field of flow computers, data storage, gas property measuring instruments and ultrasound gas
meters, and it supports all activities that are necessary for the commissioning and maintenance of
these terminal devices. enSuite replaces the WinPADS series. The main functions only are briefly
explained here. For a more detailed description please refer to the enSuite documentation.
7.1 Setting up the communication link to the EK205-M via optical
interface
i
To set the EK205-M parameters via the optical interface, you need an optical read
head cable, available from Honeywell.
The parameterization program enSuite can be downloaded for free at
www.elster.com.
−
Insert the optical read head into the ring on the front panel of the EK205-M and connect the
other end to a COM or USB port on your PC or laptop.
−
Connect a PC or laptop to the EK205's optical interface using the cable.
−
Start the enSuite program (i.e.
−
Press symbol
−
In the "Search device and
−
Select "Access"
default settings".
−
In the field "Key" enter the administrator key.
−
Press "OK".
−
After a few seconds "connected" is displayed at the bottom of the "Output" window.
7.2

Setting up the communication link to EK205-M via a modem

Prerequisite: A communication link between enSuite and the EK205-M ( section 8).
−
Ensure your PC or laptop is configured for remote data transmission, i.e. is connected to a
modem.
−
Start the enSuite program (i.e.
−
Press symbol
−
In the "Search device and
−
Select "Access"
default settings".
−
In the field "Key" enter the administrator key.
−
Enter the EK205's SIM card telephone number under "Modem"
−
Press "OK".
−
After a few seconds "connected" is displayed at the bottom of the "Output" window. Via a GSM
modem communication link to an EK205-M this may take up to a minute.
7.3 Setting up the communication link to EK205-M via a network
(TCP/IP)
Prerequisite: A communication link between enSuite and the EK205-M ( section 8).
−
Ensure your PC or laptop is connected to the LAN. The EK205-M must be connected to the
same network.
−
Start the enSuite program (i.e.
Start > Programs > Elster >
"Search device..." (magnifying glass symbol).
connect" window select the "LIS200" tab.
  "Administrator", "Connection"  "Optical" and
"LIS200", "User"
Start > Programs > Elster >
"Search device..." (magnifying glass symbol).
connect" window select the "LIS200" tab.
  "Administrator", "Connection"  "Modem" and
"LIS200", "User"
Start > Programs > Elster >
Working with enSuite
enSuite).
enSuite).
enSuite).
"use
"use