Table of Contents
Advertisement
82
44
The APN password or APN user name is wrong.
45
The APN parameters are already in use by another mobile phone subscriber.
Display Meaning
70
Failure to establish a communication link to the remote subscriber.
Possible cause: blocked by remote subscriber firewall, for example.
71
The remote subscriber did not respond (timeout).
Possible causes: the remote subscriber is switched off or the remote subscriber has not been
started.
The remote subscriber reports "unknown device type".
72
73
The EK205-M does not understand the remote subscriber response.
Possible cause: e.g. transfer error.
74
Sending error: when attempting to send data to the remote subscriber, the modem reported an
error.
255
An unknown error has occurred.
8.3.3 Status of remote subscriber "MDst"
Display Meaning
0
No connection started to the remote subscriber.
1
The remote subscriber is not fully configured. Check the related EK205-M telephone book entry.
2
Connection to remote subscriber is being established.
3
Remote subscriber is busy.
4
Connection to remote subscriber established.
5
Disconnection from remote subscriber in progress.
6
Disconnection from remote subscriber finished.
7
Remote subscriber not reached. Check the related EK205-M telephone book entry or check the
readiness for reception of the remote subscriber.
8
Remote subscriber refused the connection. Check the related EK205-M telephone book entry or
check the readiness for reception of the remote subscriber.
9
Connection to remote subscriber aborted during communication.
11
Connection denied.
12
Connection denied (invalid access data).
13
Connection to the remote subscriber aborted (timeout).
Data transfer
Advertisement
Table of Contents
