66
6.3.3 Data recall, display navigation
Using the arrow keys , , , , you can move the cursor
display and switch to the other values.
By pressing the ESC button one or more times, you will be directed to the
"Main", "Cust.", "Admin", "Serv." or "Ctrl." registers ( 6.3.1, Fig. 24). The
active register over which the cursor is hovering, is presented with a light-
coloured background (Fig. 25/1). In the "register" bar, you can move the
cursor to other registers using the arrow keys and to display their
content.
The "Cust." register contains more data than can simultaneously be
displayed. The arrow key is used to move the cursor from the register to
the data field (the bottom part of the display). By moving the cursor to the
lowest visible value, the display can be shifted upwards by re-pressing the
button to display further data. The button can also be used to move
the cursor and therefore the display upwards by moving to the highest
visible value.
If the cursor hovers over a value which has been saved with a
corresponding timestamp, it will automatically display this value. (Fig. 25/2)
1
Active register
2
Value with corresponding timestamp
1
Fig. 25: "Cust." register
Operation
around the
2