SUMMARY OF CONNECTIONS
LED STATUS TABLE
LED #
1 (Green)
2 (Red )
3 (Green)
4 (Green and Red)
Functions
Blinks once upon RF signal transmission (HW zone trigger/tamper and/or a fault
message) and a slow blink for a cover tamper
Quickly blinks during the enrollment/deletion process
Blinks 1s / 1s off when module needs calibrating
Steady on when the module has been calibrated.
Green: 5VDC Power from the plug-in transformer is present
Red (blinking 1sec on / 1 sec off @ 1hz each): Running on battery, DC power not present.
4