Table of Contents
Advertisement
Group
This is used to select zones and work with task keys to initiate broadcast operation. If the function
is Group, the corresponding group should be specified from the list, which is displayed as below:
Task Broadcast
If the function is the task broadcast, the trigger mode and task name must be set. Click the trigger
mode to select toggle or press. Toggle means the user must press the trigger once to start the
broadcast and press again to stop. Press means press and hold the trigger during the broadcast
and release to stop. Select the task name from the drop-down list.
Volume Control
If the function is volume control, users need to set the volume type and step. The volume step
range step is from -31 to +31. If it is negative, the volume will be decreased. If it is positive, the
volume will be increased. The volume type includes "MIC/LINE input", "AUX1 Input", "AUX2 Input",
"Audio Channel1/Master volume", "Audio Channel 2" and "Remote Call Station Input". Other
volumes can be set via the menu of the MCU.
84
Advertisement
Table of Contents
