Honeywell INTEVIO User Manual page 61

2． Audio Channel Setting
The system can support a maximum of 2 audio channels. The RK-MCU and RK-ZONE8 can
support both single and dual audio channels. Before use, set the audio channel via the "MODE"
switch.
Switch No. Function
1 Audio channel
3． Line Supervision Disabled
Line supervision of RK-MCU can be forcibly disabled by setting the "MODE" switch.
Switch No. Function
Line
2
supervision
RK-ZONE8 Zone Expander
1． Standalone & Networking Mode Setting
Zone expanders can work in standalone and networking mode, which can be set using the
"MODE" switch. When the device works in STANDALONE mode, it only broadcasts line input
audio in audio channel 1. The loudspeaker line can be enabled and disabled by setting the
contact input. When the device is in networking mode, the RK-MCU performs broadcast control
and status supervision on zone expanders.
Switch No. Function
1 Work mode
2． Line Supervision Disabled
Line supervision of zone expanders can be forcibly disabled by setting the "work mode" switch.
Switch No. Function
2 Line supervision
RK-AMP500 500W Class-D Power Amplifier
1． Main Power Supervision
Main power fault supervision can be enabled by setting the power amplifier's DIP switch.
Switch No. Function
Main power
1
supervision
Description

ON——Dual Channel Mode

OFF——Single Channel Mode
Description

ON——Disabled

OFF——Work as configured
Description

ON——Standalone Mode

OFF——Networking Mode
Description

ON——Disabled

OFF——Work as configured
Description

ON——Enabled

OFF——Disabled
53