Honeywell INTEVIO User Manual page 121

Date & Time
Users can set the time zone, date, and time in the interface above

Time Zone
Select Time Zone and press the knob to enter the setting interface. The range is from -12 to
+12. Rotating the knob can adjust the time zone and pressing it can exit the setting.
Note:
If the time zone setting on the device does not match the local time zone, the time displayed on
the device will be incorrect when synchronizing time via the network.

Date
Select Date and press the knob to enter the setting interface. The default is the year setting.
Users can rotate the knob to adjust and press it to proceed to the month setting. After all the
settings have been made, the device will automatically exit the interface.

Time
Select Time and press the knob to enter the setting interface. Set the time in the same manner
as the date. After all options have been set, the device will automatically exit the interface.
After setting the time zone, date, and time, rotate the knob to select OK and press it. If users select
Return, the device will return to the previous menu without saving.
Network Setting
When the MCU is connected to other devices via Ethernet, such as a computer, users need to set
network parameters.
In the Network Setting interface, users can set the IP address, subnet mask, and gateway. Select
the items which need to be set and press the knob to set them. Rotate the knob to adjust the setting
and press it to move to the next setting . After making all the settings, press the knob to exit.
113