Honeywell INTEVIO User Manual page 122

Please follow the steps above to make the settings and rotate the knob to select OK. Then press the
knob to save and return to the previous menu. If users select Return, the device will return to the
previous menu without saving.
Change Password
Users can set a new password in the Change Password interface. Press the knob to enter the setting
interface and rotate it to set. Press it again to move to the next setting. After making the settings,
rotate the knob to select OK and press it to save. If users select Return, the device will return to the
previous menu without saving.
Language Setting
The MCU supports multi-language display. Users can set the language in the menu shown above. If
the language list does not meet the user's requirements, they can also add new languages via the
configuration software. Rotate the knob and move the cursor to the required language. Press the
knob and the icon will be displayed. Select OK and press the knob to save the settings. If users
select Return, the device will return to the previous menu without saving.
Note:
Device will restart after clicking Save.
114