Honeywell INTEVIO User Manual page 105

Indicator Color
CLOSE Green
MONITOR CH1 Green
MONITOR CH2 Green
RECORD Green
PLAYBACK Green
LINE IN Green
MICROPHONE Green
Yellow
Green
Indicators of
Programmable
Keys
Red
Orange
Status Description
Flashing Select all speaker lines.
OFF The key has not been pressed.
Flashing
The key has been pressed.
once
OFF CH1 is not monitored.
ON CH1 is being monitored.
OFF CH2 is not monitored.
ON CH2 is being monitored.
OFF No recording operation.
Flashing The device is in the process of recording operation.
OFF No playback operation.
ON Playing the temporary recorded file in the loudspeaker.
The task isn't activated.
OFF
ON The task is activated.
The task of microphone paging isn't activated.
OFF
Flashing Playing pre-signal or end-signal.
ON Paging by the microphone.
ON Microphone failure is detected.

The group is idle.

The task isn't activated.
OFF

No operation.

The group is selected.
Flashing

Activating the task.
Flashing

Change volume.
once

Normal mode: zones are broadcasting.

Emergency mode: zones are warning.
ON

Selected audio source is being played.

Volume has been adjusted to the limit.

Waiting to broadcast selected emergency audio
Flashing
source.

Emergency mode: zones are playing evacuation
broadcast or paging.
ON

Selected emergency audio source is being
played.

Loudspeaker lines in zone or group have a fault
(open circuit, short circuit or earth fault).
ON

Corresponding audio or voice has fault.
97