Table of Contents
Advertisement
No.
Item
5
MCU Output [CH1/Master]
7
MCU Output [CH2]
8
MCU Output [Monitor]
9
MCU Amp [CH1]
10
MCU Amp [CH2]
11
MIC Input
12
Z8-x Amp [CH1]
13
Z8-x Amp [CH2]
In the volume setting interface, rotate the knob to move the cursor and press it to enter the setting
interface as shown below. Rotating the knob can adjust the value.
Select Return and press the knob to exit the volume setting interface and return to the previous menu.
Schedule Item
Users can view, enable, or disable the timing task via Schedule Item. The setting is only valid for the
current day. All the timing tasks will be displayed in Schedule Item. The icon
task means it is enabled and pressing the knob again will disable it. Users can view more tasks by
rotating the knob.
Users can select Return and press the knob to go back to the "System Setting" page.
Range Description
0~31
Set the volume of audio channel 1 of MCU.
0~31
Set the volume of audio channel 2 of MCU.
0~31
Set the volume of monitor output of MCU.
Set the volume of power amplifiers which are
0~31
connected to CH1 of MCU.
Set the volume of power amplifiers which are
0~31
connected to CH2 of MCU.
Set the volume of the audio signal from remote call
0~31
stations.
Set the volume of power amplifiers which are
0~31
connected to CH1 of RK-ZONE8 with the address x.
Set the volume of power amplifiers which are
0~31
connected to CH2 of RK-ZONE8 with the address x.
beside the timing
112
Advertisement
Table of Contents
