Rk-Amp500 500W Class-D Power Amplifier; Rk-Mic Remote Call Station - Honeywell INTEVIO User Manual

RK-AMP500 500W Class-D Power Amplifier

Indicators
Indicator
POWER
MAINS
BACKUP
PROTECTION
Level Meter
Buttons/Switches
Button/Switch
Power switch

RK-MIC Remote Call Station

Indicators
Indicator
POWER
GENERAL
FAULT
NETWORK
FAULT
BUSY
ALL
Color Status Description
ON Device is powered on.
Green
Flashing Device is in power-saving mode.
OFF Main power supply works normally.
Yellow
ON Main power failure detected.
OFF Backup power supply works normally.
Yellow
ON Backup power failure detected.
OFF Device works normally.
The output of the power amplifier is turned off due to the
Yellow
ON over-temperature protection, overload or output short
circuit.
OFF The power amplifier has no signal input.
Green The power amplifier is working.
Red Clip, audio signal level is higher than the maximum level.
Action Description
Press Connect or disconnect main power supply.
Color Status Description
ON Power on.
Green
Flashing The system is in power-saving mode.
OFF The system is normal.
Yellow Flashing New fault is found.
ON Fault exists in the system and has been confirmed.
The connection with MCU is normal or the device is in
OFF
standalone mode.
Yellow
ON Connection failure with MCU is detected.
OFF The audio channel to MCU is idle.
The audio channel is occupied by the microphone of
Flashing another remote call station which has lower priority than
Yellow this device.
The audio channel is occupied by the microphone of
ON
another remote call station which has higher priority than
this device.
Green OFF Function is disabled.
96