Honeywell INTEVIO User Manual page 113


If the system receives any fire alarm signals and is working in auto. emergency mode, the icon
turns red and the description is "AUTO".

If the emergency button is pressed and the system is working in manual emergency mode, the
icon turns red and the description will be "MANUAL".
General Fault Status

If the system is working normally and no faults are detected, the icon will be grey.

If there is a fault, the icon will turn yellow.
Monitor Status
The characters show the current status:

None means no monitoring.

"CH1" means audio channel 1 is being monitored.

"CH2" means audio channel 2 is being monitored.
Master Volume

The digit shows the current volume of audio channel 1; background music is usually played in
audio channel 1.
Menu Button

The device will display the main menu by pressing the menu knob.
USB

When a USB storage is inserted into the device, this icon will be displayed.
Timing

When the timing function is enabled, the screen will show the task's name and time. If there
isn't a timing task, the icon will be hidden.
Main Menu
From the homepage, press the menu knob and the device will display the main menu. Users can
view the submenus: "Select Zones", "System Status", "Check Recorded Files", "System Setting" and
"Device Information". Rotate the menu knob to move the cursor and press the knob to enter the
submenu. Select Return to go back to the homepage.
Select Zones
All the zones will be displayed in Select Zones. Users can rotate the knob to move the cursor, then
press the knob to select or unselect. The icon
selecting the zones, press the audio button to broadcast.
If an exclamation icon is displayed beside the zones, then the corresponding zone has a fault. Users
can select Return and press the knob to go back to the homepage.
will be displayed beside the selected zones. After
105