Rk-Mic Remote Call Station - Honeywell INTEVIO User Manual

Power Input
Main power interface with a resettable fuse is used to connect to an AC power source. T10 AH/250V
fuse is recommended.
The backup power interface is used to connect to a 24 V DC power source.
2 2
The connector is provided in the package, a 2-pin cable with a cross-section of 3mm to 3.5mm is
recommended.

RK-MIC Remote Call Station

Line Input
The line input interface of the RK-MIC uses a 3.5mm TRS interface, which can be directly connected
with an audio device via cables. Provided audio cable can match the interface when connecting the
RCA interface of an audio device.
Call Station Interface
There are two RJ-45 ports, named UP LINK and DOWN LINK. The UP LINK interface is used to
connect to the Master Control Unit or the DOWN LINK of a call station. The DOWN LINK interface
is used to connect to the UP LINK of a call station. The interface includes 24 V DC power, audio and
the CAN control bus.
A twisted pair CAT-5 is recommended. A twisted-pair cable (2m) is provided in the call station
package.
Power Input
The remote call station can be powered by the Master Control Unit via twisted-pair cable or by the
external power adaptor. For long cable distances or a large quantity of devices, a power adapter can
be connected directly even it is also powered by the Master Control Unit. The call station will switch
to the external power input automatically.
31