Honeywell INTEVIO User Manual page 76


Group Contents
Select a group and the Group Contents will display all the speaker lines of this group. Choose
a device and select speaker lines to add to the group. Users can also put speaker lines into the
group contents by dragging them. If users drag a device from the device list to group contents,
then all the zones of the device will be added to the group.
Users can click the
group list.
6． Linkage
Linkage is used to set the fire alarm linkage function. Users can set each zone separately as
shown below:
Each column is matched with a fire alarm input. The input signal can be the contact input or the
fire signal sent by the fire alarm system via the LPI-ModBus module. Each page can display a
maximum of 32 input signals. Users can select other pages by clicking the dropdown list. Each
row is matched with one speaker line. Users can view more content by dragging the scroll bar.
Set each column's broadcast zones separately. Some tools are explained below:
Evacuation: This is used to set linked evacuation lines which are related to fire alarm inputs.
Alert: This is used to set linked alert lines which are related to fire alarm inputs.
Clear: This is used to clear a cell's settings.
Clear current flags: This is used to clear all flags of a device.
Clear all flags: This is used to clear all cells' settings.
Select: This is used to select a cell.
Select the icon or
If the system is configured to be connected to a fire alarm system via contact inputs, there are
more parameters. Each page displays the contact inputs of each device. If more devices need
to be used for the fire alarm system, please select the devices from CIE Input. The interface is
icon or right click and select Delete to delete one or more groups in the
and click a cell to set it. Select clear tools to clear the settings.
68