Honeywell INTEVIO User Manual page 114

System Status
The system status menu displays the device list of the system. The device address is shown in the
brackets to the right of the models. The right column displays the status of each device, such as
Normal, Fault, or Offline, so users can see the device status easily
Rotate the menu knob to move the cursor. Select a device and press the knob to view the fault in
detail. Select Return and press the knob to return to the main menu.
If users select RK-MCU, the interface appears as below:
The fault list of the RK-MCU is as follows:
No. Component
1 Main PS
2 Backup PS
3 PTT Microphone
4 Configuration File
5 Audio File Storage
6 CH1 Amp PS
Status Description
Normal/Fault Display the main PS fault status.
Normal/Fault Display the backup PS fault status.
Normal/Fault Display the PTT microphone status.
Normal/Fault Display the configuration file status.
Normal/Fault Display the fault status of the audio file storage.
Display the status of the power supply of the power
Normal/Fault
amplifiers which are connected to CH1.
106