Preparation For Installation; Preparing Tools; Preparing Auxiliary Materials; Preparing Cables And Auxiliary Equipment - Honeywell INTEVIO User Manual

Preparation for Installation

Before installing the system, appropriate preparation is required to ensure a smooth installation
process.


Preparing tools



Preparing auxiliary materials


Preparing cables and auxiliary devices

Packing list inspection
Preparing Tools
Prepare the following tools before installing the system equipment:

Electrostatic proof wrist band

Electrostatic proof gloves

Wire stripping pliers

Wire cutting pliers

RJ-45 crimp tool

Slotted screwdriver (M2)

Phillips screwdriver (P1)
Preparing Auxiliary Materials
Prepare the following auxiliary materials before installing the system devices:

Insulating tape

Wire buckles

Cable labels

Plastic ties

Preparing Cables and Auxiliary Equipment

Prepare the following cables before installing the system devices:

Power cable
The power cable used for mains power is provided in the package. The connector of the
backup power interface is included in the package instead of a power cable. The Installer
should connect it via the 3-pin cable, which with a recommended cross-section from 0.5mm
1.5mm

Power amplifier control interface cable
A twisted-pair cable (2m) is provided in power amplifier package.

Power amplifier cable
This cable is used to connect the controller to the power amplifier as well as the controller (RK-
MCU or zone expanders) to the loudspeakers.
An audio cable with a cross-section of 0.5mm

Audio cable
When connect to external audio source, such as CD/DVD player, etc. It is recommended to
use shielded cable.
2
.
2 2
to 1.5mm is recommended.
2
to
32