Table of Contents
Advertisement
It is recommended to use an L or U-shaped plate to support the devices in the cabinet and
ensure acceptable stress levels on the device brackets.
Do not pile the devices with only fixing the brackets of front panel.
In order to comply with the regulations of EN 54-16 certification, please install the machine legs
which are provided in the packages.
4． After installing all the plates, softly push devices into cabinet till both sides of rack touch the
inside frame of cabinet.
5． Use the screws provided to fasten both brackets to the cabinet.
6． Install the 1 U panel to the free space.
Installing the Remote Call Station on Desktop
Installing the Key Module
If there are key modules, please follow the procedures below to connect key modules to remote call
station:
1． Turn the remote call station and key module over on the desktop, as shown below:
Note:
34
Advertisement
Table of Contents
