Install A User Certificate - Honeywell Thor VM2 User Manual

Install a User Certificate

After generating and exporting the user certificate, install the user certificate.
1. Copy the certificate from the PC to the Thor VM2.
2. Locate the certificate file (it has a .PFX extension) and double-click on it. If clicking
3. The certificate import wizard starts. Tap Next.
4. Confirm the certificate file name and location.
5. Tap Next.
6. You are prompted for the password that was assigned when the certificate was
7. It is not necessary to select either of the checkboxes displayed above.
8. Enter the password and tap Next.
9. On the next screen, allow Windows to automatically select the certificate store, then
Manually Initiate Certificate Installation
If the Certificate Wizard does not start automatically when you double-tap the certifi-
cate .PFX file:
1. Select Start > Run and type certmgr.msc in the text box and tap OK (Windows
2. Select Start and type certmgr.msc in the search box and press Enter (Windows
3. In the left pane, right-click Personal and select All Tasks > Import.
4. The Certificate Import Wizard starts.
294 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
on the certificate file does not launch the certificate import wizard, follow the
Manually Initiate Certificate Installation
exported.
click Next and Finish. An import successful message is displayed.
Embedded Standard 2009 only).
Professional 7 and Windows Embedded Standard 7 only).
before continuing the instructions below.