Honeywell Thor VM2 User Manual page 220

New
Tap the New button to create a new profile. Each profile must have a unique name.
Enter the name and tap OK to create a new profile or tap Cancel to exit without creating
a profile.
Delete
Tap Delete to delete the currently highlighted profile in the Profile: drop down box. Tap
Yes to delete the profile or No to exit without deleting.
Note: You cannot delete the currently active profile.
Parameters
The items on the Parameters tab only affect the selected profile.
When a property is selected from the list either a text box or a pull down list is displayed
to the right for the entry of a value for that property. After changing the desired proper-
ties, tap the Commit button.
Property
Profile
Name
SSID
Client
Name
Tx Power
Power
Save
Radio
Mode
Auth Type
WPA
Encryptio
n
214 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Default
Explanation
Value
Blank The name entered when the profile was created. The profile can be renamed with
this option.
Blank A string of up to 32 alphanumeric characters. Establishes the Service Set
Identifier (SSID) of the WLAN to which the client connects.
Blank A string of up to 16 characters. The client name is assigned to the network card
and the device using the network card. The client name may be passed to
networking wireless devices, e.g. Access Points.
Maximu Maximum setting regulates Tx power to the Max power setting for the current
m regulatory domain.
Options are: Maximum, 10%, 25%, 50%, 75%.
Fast Power save mode.
Options are: Constantly Awake Mode (CAM), Maximum (power saving mode)
and Fast (power saving mode). When using power management, use FAST for
best throughput results.
BGA Specify 802.11a, 802.11b and/or 802.11g rates when communicating with the
Rates Full AP. The options displayed for this parameter depend on the type of radio
installed in the mobile device.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
Ad Hoc (when connecting to another client device instead of an AP)
Default:
BG Rates Full
Open 802.11 authentication type used when associating with the Access Point.
Options are: Open or Shared.
None None, WPA/WPSA2, WPA2
None Type of encryption to be used to protect transmitted data.
Options are: None, WPA TKIP, AES-CCMP, or WEP.