Honeywell Thor VM2 User Manual page 159

There may be audible or visual signals as paired devices re-connect with the Thor VM2.
Taskbar
Icon
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM2
Bluetooth scan range, the Bluetooth connection between the paired device and the Thor
VM2 is lost. There may be audible or visual signals as paired devices disconnect from the
Thor VM2.
Bluetooth LED
Blue, blinking slowly
Blue, blinking medium
Blue, blinking fast
Off
Bluetooth Bar Code Reader Setup
Please refer to the Bluetooth scanner manufacturer's User Guide; it may be available on
the manufacturer's web site.
Honeywell supports several different types of bar code readers. This section describes
the interaction and setup for a mobile Bluetooth laser scanner or laser imager con-
nected to the Thor VM2 using Bluetooth functions.
Prerequisites
•
•
•
•
•
Locate the bar code label, similar to the one shown above, attached to the Thor VM2.
The label is the Bluetooth address identifier for the Thor VM2.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Legend
Thor VM2 is connected to one or more of the targeted Bluetooth device(s).
Thor VM2 is not connected to any Bluetooth device.
Thor VM2 is ready to connect with any Bluetooth device.
Thor VM2 is out of range of all paired Bluetooth device(s). Connection is inactive.
Legend
Bluetooth is active but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering other Bluetooth devices.
Bluetooth hardware has been turned off or does not exist in the Thor VM2.
If the Thor VM2 has a Bluetooth address identifier bar code label affixed, then
Bluetooth hardware and software is installed.
The mobile Bluetooth laser scanner / laser imager battery is fully charged.
The Thor VM2 is connected to AC or DC (vehicle) power.
Important: The bar code numbering examples in this segment are not real and
should not be created nor scanned with a Bluetooth scanner.
To open the EZPair program, tap
Bluetooth icon on the desktop or tap the Bluetooth icon in the taskbar.
(Start) > Control Panel > Bluetooth or tap the
159