LEAP
To use LEAP (without WPA, also called WEP-LEAP), make sure the following profile
options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type as follows:
•
•
3. Set WPA to None
4. Set Encryption to WEP
5. Set Authentication to LEAP
See
To use Stored Credentials, scroll down to enter the User Name and Password. No entries
are necessary for Sign-On Credentials as the user will be prompted for the Username
and Password when connecting to the network.
230
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
If the Cisco/CCX certified AP is configured for open authentication, set Auth Type to
Open.
If the AP is configured to use shared key or passphrase, set Auth Type to Shared.
Sign-On vs. Stored Credentials
for information on entering credentials.