Honeywell Thor VM2 User Manual page 235

WEP
To connect using WEP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA to None
4. Set Encryption to WEP
5. Set Authentication to None
Scroll down to enter the WEP key(s).
Valid keys are 10 hexadecimal or 5 ASCII characters (for 40-bit encryption) or 26 hexa-
decimal or 13 ASCII characters (for 128-bit encryption). Enter the key(s) and click Com-
mit.
Ensure the correct Active Profile is selected on the Configuration tab and restart. The
Status tab shows the device is connected.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide 229