Configuration Cloning Utility Command Line Interface - Honeywell Thor VM2 User Manual

3. Select the desired program(s) from which to import the settings.
4. Make any desired changes to the settings.
5. Tap Registry > Apply Settings
6. Select File > Save then specify a file name and tap Save to save the settings to a ccf
7. Reboot the Thor VM2 for the new settings to take effect.
8. The ccf file can be used to configure another Thor VM2. See Example 4.
Example 3: Reset a device to system defaults
To import and apply the default values to the Thor VM2 running the CCU:
1. If you want to view the default settings before applying, User and select Advanced.
2. Tap File > Open and change the file type to ddf files (*.ddf).
3. Select the desired ddf file(s) for the software program(s) to return to default values.
4. Tap File > Save and specify a file name for the ccf file.
5. Tap Registry > Apply Settings.
6. Reboot the Thor VM2 for the new settings to take effect.
7. The ccf file can be used to configure another Thor VM2. See Example 4.
Example 4: Clone settings to another device
1. Create a ccf file using any of the above examples.
2. Copy the ccf file to C:\Windows\DDF on the destination Thor VM2.
Note: Rather than using the CCU GUI, the command line can be used to apply the settings to the
destination device.
3. Open the CCU on the destination device.
4. Tap File > Open and select the ccf file that was copied to the device.
5. Tap Registry > Import.
6. When prompted to Default all Non-Configured Parameters:
7. Reboot the Thor VM2 for the new settings to take effect.

Configuration Cloning Utility Command Line Interface

Note: The CCU GUI must be closed before launching the command line interface.
212 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
file.
• Tap Yes to set all parameters not configured in the ccf file to defaults on the
destination device.
• Tap No to apply the values from the ccf file and leave all other parameters as-is
on the destination device.
• Tap Cancel to exit with no changes to the destination device.