Honeywell Thor VM2 User Manual page 186

Keymap
A key or combination of keys can be remapped to provide a single keypress or a string of
keypresses.
Assign settings by clicking radio buttons and selecting keys from the drop down boxes.
Tap the OK button to save changes and exit the Programmable Keys control panel.
Tap the Cancel button to discard any changes and exit the Programmable Keys control
panel.
Tap the Restore Defaults to return all Programmable Keys to their default values and
exit the Programmable Keys control panel.
Remap a Key to a Single Key
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select the value for the remapped key from the Remapped Key pull-down list.
4. Click OK to save the result and close the control panel.
Remap a Key to a Unicode Value
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Unicode from the Remapped Key pull-down list.
4. There are two Unicode text boxes located on the lower part of this tab. Enter the
5. Click OK to save the result and close the control panel.
186 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Unicode value in the text box to the right of ALT + and the Unicode character is
displayed in the box to the right of =.