Honeywell Thor VM2 User Manual page 148

Factory Default Settings
Discovered Devices
Settings
Turn off Bluetooth
Computer is connectable
Computer is
discoverable
Prompt if devices
request to pair
Continuous search
Filtered Mode
Printed Port - COM7:
Logging
Computer friendly name
Reconnect
Report when connection
lost
Report when
reconnected
Report failure to connect
Clear Pairing Table on
Boot
Auto Reconnect on Boot
Auto Reconnect
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth
devices are discovered, paired, connected and disconnected. There may be audible or
visual signals as paired devices re-connect with the Thor VM2.
•
•
•
•
•
•
•
148 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
The default Bluetooth setting is On.
The Thor VM2 cannot be discovered by other Bluetooth devices when the Computer
is discoverable option is disabled (unchecked) on the Settings panel.
Other Bluetooth devices cannot be discovered if they have been set up to be Non-
Discoverable or Invisible.
When Filtered Mode is enabled, the Thor VM2 can pair with one Bluetooth scanner
and one Bluetooth printer.
When Filtered Mode is disabled, the Thor VM2 can pair with up to four Bluetooth
devices.
It is not necessary to disconnect a paired scanner and printer before a different
scanner or printer is paired with the Thor VM2.
The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters)
Line of Sight) to the Thor VM2 during the pairing process.
None
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled (unchecked) by default in both Filtered and Non Filtered Modes. The
option is dimmed in Non Filtered Mode.
Disabled
System Computer Description
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled