Honeywell Thor VM2 User Manual page 213

Vehicle-mounted computer
Hide thumbs Also See for Thor VM2:
Table of Contents

Advertisement

To launch the Client Configuration Utility from the command line, select
Programs > Accessories and right click on the Command Prompt icon. Select Run as
administrator.
It is necessary to open the command window as an administrator because
the CCU must be able to access and make changes to the Windows registry.
The command utility can be run from the installed location (C:\Program Files\Honey-
well\Configuration Cloning Utility) or in portable mode (such as from a USB drive).
When running in portable mode copy the following files to the USB drive:
A batch file (.bat) can be created to run the CCU commands.
Refer to the examples below to use the command line.
Example 1: Launch GUI
CCU.exe
If ran with no parameters, the GUI CCU interface is opened.
Example 2: Import settings
CCU.exe -import -[programs] -C:\myfile.ccf
Us this command line example to import the current settings from the Thor VM2 run-
ning the CCU.
Where:
import directs the CCU to read the settings from the system registry.
[programs] is replaced by one or more of the following programs from which to import
settings, separated by an asterisk (*):
C:\myfile.ccf is the path and filename assigned to the file to settings read from the
device. The file must have a .ccf extension. If a file name is specified without a path, the
ccf file is saved to C:\Windows\DDF.
CCU.exe -import -*.* -C:\myfile.ccf
The example above imports settings from all available programs into a file named
myfile.ccf.
CCU.exe -import -RFTerm -C:\myfile.ccf
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Configuration Cloning Utility.exe (from installation directory)
PrivateKeyLoaded.dll (from installation directory)
ccf file(s) (from C:\Windows\DDF or other user-specified folder)
RFTerm - RFTerm terminal emulation settings
BTDRWIN7 - Bluetooth EZ Pair settings
ThorWin7 - certain Honeywell specific control panels settings
*.* can be used to import settings from all available programs.
(Start) > All
213

Advertisement

Table of Contents
loading

Table of Contents