Configuring The Profile - Honeywell Thor VM2 User Manual

4. Tap Commit to save the profile changes.

Configuring the Profile

Use the instructions in this section to complete the entries on the Profile tab according
to the type of wireless security used by your network. The instructions that follow are the
minimum required to successfully connect to a network. Your system may require more
parameters than are listed in these instructions. Please see your system administrator
for complete information about your network and its wireless security requirements.
To begin the configuration process:
•
•
•
IMPORTANT – Remember to click the Commit button after making changes to ensure
the changes are saved. The LCM may display a reminder if the Commit button is not
clicked before an attempt is made to close or browse away from the tab in focus if there
are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first
before making any additional changes.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
• On the Profile tab, choose Select Cert for the CA Cert property. From the pop-up
window, select the desired certificate and tap OK.
From the Configuration tab tap Manage Profiles > Admin Login. Enter the password
and tap Login.
If using a single profile, edit the default profile with the parameters for your network.
Select the Default profile from the pull-down menu.
Make any desired parameter changes as described in the applicable following
section determined by network security type and click the Commit button to save the
changes.
227