Install A User Certificate - Honeywell Thor VM3 User Manual

The Certificate Export Wizard is started
Select Yes, export the private key and click Next.
Uncheck Enable strong protection and click Next. The
certificate type must be PKCS #12 (.PFX).
When the private key is exported, you must enter the
password, confirm the password and click Next. Be sure
to remember the password as it is needed when
installing the certificate.
Supply the file name for the certificate. Use the Browse
button to select the folder where you wish to store the
certificate. The certificate is saved with a .PFX extension.
Click Finish and OK to close the Successful Export message.
Locate the User Certificate in the specified location. Copy to the Thor VM3. Install the
User certificate.

Install a User Certificate

After generating and exporting the user certificate, install the user certificate.
1. Copy the certificate from the PC to the Thor VM3.
2. Locate the certificate file (it has a .PFX extension) and double-click on it. If clicking
3. The certificate import wizard starts. Tap Next.
4. Confirm the certificate file name and location.
5. Tap Next.
6. You are prompted for the password that was assigned when the certificate was
234 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
on the certificate file does not launch the certificate import wizard, follow the
Manually Initiate Certificate Installation
exported.
before continuing the instructions below.