Connect Usb Host - Honeywell Thor VM2 User Manual

Connect USB Host

Host / Client Y Cable
D9 Connector
See
1. Seat the D9 connector firmly over the USB (Standard Dock) or USB1 (Enhanced
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connector provides a connector for a USB device such as a USB
4. Secure the cables to the Thor VM2 with
Dual Host Y Cable
See
1. Seat the D15 connector firmly over the USB2 (Enhanced Dock only) connector on
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connectors provide a connector for a USB device such as a USB
4. Secure the cables to the Thor VM2 with
USB Scanner
There are several ways to attach a USB scanner:
•
•
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
USB and USB1 Connector
Dock) connector on the dock.
thumb drive.
D15 Connector
USB2 Connector for connector pinouts.
the dock.
thumb drive.
A USB scanner can be attached to the USB host port on the Enhanced Dock.
A USB scanner can be attached to the host port on either USB adapter Y-cable.
USB Host Connector
USB Client Connector
for connector pinouts.
Strain Relief Cable
USB Host Connectors
Strain Relief Cable
Clamps.
Clamps.
123