Install A User Certificate - Honeywell Thor VM1 User Manual

Make sure the Personal tab is selected. Highlight the certificate and click the Export
button.
The Certificate Export Wizard is started
Select Yes, export the private key and click Next.
Uncheck Enable strong protection and click Next. The
certificate type must be PKCS #12 (.PFX).
When the private key is exported, you must enter the
password, confirm the password and click Next. Be sure
to remember the password as it is needed when
installing the certificate.
Supply the file name for the certificate. Use the Browse
button to select the folder where you wish to store the
certificate. The certificate is saved with a .PFX extension.
Click Finish and OK to close the Successful Export message.
Locate the User Certificate in the specified location. Copy to the Thor VM1. Install the
User certificate.

Install a User Certificate

After generating and exporting the user certificate, install the user certificate.
Thor VM1 with Microsoft Windows Embedded Standard 2009 User Guide 199