Canbus / Audio Connector; Power Supply Connector - Honeywell Thor VM2 User Manual

CANbus / Audio Connector

Standard Dock

Power Supply Connector

Standard Dock
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
COM1
COM2
USB
CANBUS/AUDIO
Enhanced Dock
Enhanced Dock
Power is supplied to the Thor VM2 through the
power connector. Additionally this assembly
provides a connection point for the vehicle's
chassis ground to be connected internally to
the conductive chassis of the computer.
The Thor VM2 internal power supply can
accept DC input voltages in the range of 10 to
60 Volts DC when using the VM1D standard
dock or VM3D enhanced docks. Other docks
have different power requirements. See
for details.
See Power Supply Connector
out detail. See
mation on connecting power to the Thor VM2.
The CANbus/Audio connector is a
D-15 male connector located on
the back of the dock.
The connector supports a headset
adapter cable or a CANbus cable.
The Thor VM2 does not support
connecting audio and CANbus
simultaneously.
See CANbus / Audio Connector
connector pinout detail.
A headset cable attaches to the
CANbus / Audio connector and
provides a quick connect connec-
tion for a headset. See
Headset Cable for more informa-
tion.
The CANbus Y cable has a 9 pin F
SAE J1939 (Deutsch) and 9 pin M
SAE J1939 (Deutsch) connector.
See Connect CANbus Cable
more information.
The CANbus interface is a virtual
COM4 port. This port can be
accessed using standard Windows
API calls.
for connector pin-
Connect Power for more infor-
for
Connect
for
Dock
45