Drive D Folder Structure - Honeywell Thor VM2 User Manual

Selecting Keyboard Layout
Several keyboard layouts are included with the Key*One install. To select or change the
keyboard layout, select
Several predefined keyboard layouts are listed for SVGA and VGA. Tap the desired key-
board layout to select and launch that keyboard.
Launching Keyboard
To launch the keyboard with the preselected layout, select
board (from the shortcuts menu) or
Keyboard.
To close the keyboard, tap the X (close control) usually located in the upper right corner
of the keyboard.
Launching Keyboard with Programmable Key
To assign a
1. Review the
2. On the RunCmd tab, enter the desired keyboard layout in the applicable text box.
3. No entries are needed for parm.
4. Tap OK to save.
5. Different keyboard layouts can be assigned to different programmable keys as
Creating Customized Layout
Key*One includes a keyboard designer. To launch the designer select
Programs > Freefloat Key> Designer. For information on using the designer, refer to
the Key*One manual or the website.

Drive D Folder Structure

Windows 7 Professional and Windows Embedded Standard 7 only)
The CompactFlash hard drive includes a D: partition. This partition is used by the
Automatic Firmware Update
144 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Programmable Key
Remap a Key to Run a Command
assign a key to run a command, i.e. Run Cmd1.
The keyboard layouts are located at C:\ProgramData\Freefloat Key\Layouts. Some
example commands are provided below:
• To launch the Big Numeric keypad: C:\ProgramData\Freefloat Key\Layouts\Big
Numeric.key
• To launch the US English keyboard: C:\ProgramData\Freefloat
Key\Layouts\aga-en.key
desired.
(Start) > All Programs > Freefloat Key > Keyboard Layouts.
(Start) > All Programs > Freefloat Key> Runtime
to launch Key*One, follow these instructions:
Utility. No other files should be stored on the D: drive.
(Start) > Runtime Key-
for detailed instructions on how to
(Start) > All