Honeywell Thor VM2 User Manual page 218

Status
Start > All Programs > Laird > Laird Connection Manager > Status tab
This screen provides information on the radio:
•
•
•
There are no user entries on this screen.
Note: After completing radio configuration, it is a good idea to review this screen to verify the
radio has connected.
212 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
The status of the radio card:
• Down - The radio is not recognized by the LCM.
• Disabled - The radio is disabled.
• Not Associated - The radio has not established a connection with an access
point.
• Associated - The radio has made a connection to an access point but has not EAP
authenticated. If the encryption type is set to WEP or None, the radio can
communicate in the associated state. Otherwise the radio cannot communicate
unless it is associated and EAP authenticated.
• Connected to (SSID) - The radio is connected to the specified SSID.
IP address.
Signal strength (RSSI) displayed in dBm and graphically.