WPA PSK
To connect using WPA/PSK, make sure the following profile options are used:
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA as follows:
•
•
4. Set Encryption to either TKIP/AES or AES-CCMP depending on WPA type selected
5. Set Authentication to PSK
Click the WEP keys/PSKs button.
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and
click OK.
Once configured, click the Commit button.
250
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Select WPA/WPA2 to use either TKIP/AES or AES-CCMP
Select WPA2 to use AEX-CCMP