EAP-FAST
To use EAP-FAST, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA as follows:
•
•
4. Set Encryption to either TKIP/AES or AES-CCMP depending on WPA type selected
5. Set Authentication to EAP-FAST
The LCM supports EAP-FAST with automatic or manual PAC provisioning. With auto-
matic PAC provisioning, the user credentials, whether entered on the saved credentials
screen or the sign on screen, are sent to the RADIUS server. The RADIUS server must
have auto provisioning enabled to send the PAC provisioning credentials to the Thor
VM2.
For automatic PAC provisioning, once a username/password is authenticated, the PAC
information is stored on the Thor VM2. The same username/password must be used to
authenticate each time. See the note below for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
See
Scroll down to enter credentials. The entries necessary are determined by the type of
credentials (stored or sign on) and the type of PAC provisioning (automatic or manual).
No entries are necessary for Sign-On Credentials with automatic PAC provisioning as
the user will be prompted for the Username and Password when connecting to the net-
work.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Select WPA/WPA2 to use either TKIP/AES or AES-CCMP
Select WPA2 to use AEX-CCMP
Sign-On vs. Stored Credentials
for information on entering credentials.
239