Honeywell Thor VM2 User Manual page 285

Once successfully authenticated, import the CA certificate into the Windows certificate
store. Return to the Credentials screen and check the Validate server checkbox.
Note: Some servers may be configured to allow only a single use of the password for PEAP/GTC.
In this case, wait for the token to update with a new password before attempting to validate
the server. Then enter the new password, check the Validate Server checkbox and proceed
with the certificate process below.
If using the Windows certificate store:
1. Check the Use MS store checkbox. The default is to use the Full Trusted Store.
2. To select an individual certificate, click on the Browse button.
3. Uncheck the Use full trusted store checkbox.
4. Select the desired certificate and click Select. You are returned to the Credentials
5. Click OK then click Commit.
If using the Certs Path option:
1. Leave the Use MS store box unchecked.
2. Enter the certificate filename in the CA Cert text box.
3. Click OK then click Commit.
The device should be authenticating the server certificate and using PEAP/GTC for the
user authentication.
Ensure the correct Active Profile is selected on the Main tab and restart. The SCU Main
tab shows the device is associated after the radio connects to the network.
Note: The date must be properly set on the device to authenticate a certificate.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
screen.
279