Honeywell Thor VM2 User Manual page 124

•
To use the CBL-500-300-S00 cable:
RJ50 (10-pin) Connector
1. Seat the D9 connector of the cable over the USB or USB11 connector on the Thor
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. Follow the instructions provided with the scanner to attach the RJ50 end of the
See
124 Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide
Certain USB scanners can be attached directly to the USB or USB-1 connector using
cable CBL-500-300-S00, as shown below.
VM2 dock.
cable to the scanner.
USB Host to Scanner Cable
D9 Connector
for pinout details.