Exporting A User Certificate; Install A User Certificate - Honeywell Thor VM2 User Manual

Exporting a User Certificate

Select Tools > Internet Options > Content and click the Certificates button.
Make sure the Personal tab is selected. Highlight the certificate and click the Export button.
The Certificate Export Wizard is started
Select Yes, export the private key and click Next.
Uncheck Enable strong protection and click Next. The certifi-
cate type must be PKCS #12 (.PFX).
When the private key is exported, you must enter the password,
confirm the password and click Next. Be sure to remember the
password as it is needed when installing the certificate.
Supply the file name for the certificate. Use the Browse button to
select the folder where you wish to store the certificate. The certif-
icate is saved with a .PFX extension.
Click Finish and OK to close the Successful Export message.
Locate the User Certificate in the specified location. Copy to the Thor VM2. Install the User certificate.

Install a User Certificate

After generating and exporting the user certificate, install the user certificate.
6 - 71