Honeywell Thor VM2 User Manual page 239

Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Enter the password.
Leave the CA Certificate File Name blank for now.
Click OK then click Commit. Ensure the correct Active profile is selected on the Config-
uration tab.
See Windows Certificate Store vs. Certs Path for more information on certificate storage.
Once successfully authenticated, import the CA certificate into the Windows certificate
store. Return to the Credentials screen and check the Validate server checkbox.
If using the Windows certificate store:
1. Check the Use MS store checkbox. The default is to use the Full Trusted Store.
2. To select an individual certificate, click on the Browse button.
3. Uncheck the Use full trusted store checkbox.
4. Select the desired certificate and click Select. You are returned to the Credentials
screen.
5. Click OK then click Commit.
If using the Certs Path option:
1. Leave the Use MS store box unchecked.
2. Enter the certificate filename in the CA Cert text box.
3. Click OK then click Commit.
The device should be authenticating the server certificate and using PEAP/MSCHAP for
the user authentication.
Ensure the correct Active Profile is selected on the Configuration tab and restart. The
Status tab shows the device is connected.
Note: The date must be properly set on the device to authenticate a certificate.
Thor VM2 with with Microsoft Windows 7 or Windows Embedded Standard User Guide 233